PMC-VLX Reconfigurable Virtex-5 FPGA with Plug-in I/O Description
Acromag’s PMC-VLX boards feature a reconfigurable Xilinx® Virtex
-5 FPGA enhanced with multiple high-speed memory buffers and a high-throughput PCI-X interface. Field I/O interfaces to the FPGA via the rear J4/P4 connector and/or with optional front mezzanine plug-in I/O modules. The result is a powerful and flexible I/O processor module that is capable of executing your custom instruction sets and algorithms.
Three models provide a choice of logic-optimized FPGAs to match your performance requirements. Although there is no limit to the uses for these boards, several applications are ideal. Typical uses include hardware simulation, communications, military servers, in-circuit diagnostics, signal intelligence, and image processing.
64 I/O lines are provided via the rear (J4) connector. Additional I/O processing is supported on a separate mezzanine card that plugs into the FPGA base board. A variety of these external I/O cards offer an interface for your analog and digital I/O signals. See the AXM I/O Card data sheet for more details.
Large, high-speed memory banks provide efficient data handling. Generous DDR2 SDRAM buffers store captured data prior to FPGA processing. Afterward, data is moved to dual-port SRAM for high-speed DMA transfer to the bus or CPU. Our high-bandwidth PCI-X interface ensures fast data throughput.
Take advantage of conduction cooling for use in hostile environments. Conduction efficiently dissipates heat in environments with inadequate cooling air flow. Optional extended temperature models operate from -40 to 85°C.
Acromag’s PMC-VLX Engineering Design Kit provides software utilities and example VHDL code to simplify your program development and get you running quickly. A JTAG interface enables on-board VHDL simulation.
Specifications
FPGA
FPGA: Xilinx Virtex-5 FPGA: PMC-VLX85: XC5VLX85T FPGA with 82,944 logic cells and 48 DSP48E slices.
PMC-LX110: XC5VLX110T FPGA with 110,592 logic cells and 64 DSP48E slices.
PMC-LX155: XC5VLX155T FPGA with 155,648 logic cells and 128 DSP48E slices.
FPGA configuration: Download via PCI bus or flash memory.
Example FPGA program: VHDL provided for local bus interface, control of front & rear I/O, SRAM read/write interface logic, and SDRAM memory interface controller. See EDK
kit.
I/O Processing
Acromag AXM I/O modules: for front mezzanine: AXM modules attach to the board for additional I/O lines. Analog and digital I/O AXM modules are sold separately.
Rear I/O: 64 I/O (32 LVDS) lines supported with a direct connection between the FPGA and the rear I/O connector (J4).
Engineering Design Kit
Provides user with basic information required to develop a custom FPGA program. Kit must be ordered with the first purchase of a PMC-VLX module.
PMC Compliance
Conforms to PCI Local Bus Specification, Revision 3.0 and CMC/PMC Specification, P1386.1.
Electrical/Mechanical Interface: Single-Width Module.
PCI Bus Modes: Supports PCI-X at 100MHz, 66MHz and Standard PCI at 66MHz and 33MHz.
PCI-X Master/Target: 32-bit or 64-bit interface.
Signaling: 3.3V compliant.
Interrupts (INTA#): Interrupt A is used to request an interrupt.
Environmental
Operating temperature: 0 to 70°C or -40 to 85°C (E versions).
Storage temperature: -55 to 105°C.
Relative humidity: 5 to 95% non-condensing.
Power: Consult factory. Operates from 3.3V supply.
MTBF: Hours at 25°C, MIL-HDBK-217F, Notice 2. VLX-85: 633,360; VLX-10: 624,625; VLX-155; call factory.
The post PMC-VLX: User-configurable Virtex-5 FPGA with plug-in I/O appeared first on Acromag.