XMC-7K CC: User-Configurable Conduction-Cooled Kintex-7 FPGA Modules
Acromag’s XMC-7K modules feature a high-performance user-configurable Xilinx® Kintex®-7 FPGA enhanced with high-speed memory and a high-throughput serial bus interface. The result is a powerful and flexible I/O processor module that is capable of executing custom instruction sets and algorithms.
The logic-optimized FPGA is well-suited for a broad range of applications. Typical uses include hardware simulation, communications, in-circuit diagnostics, military servers, signal intelligence, and image processing.
The rear I/O provides an 8-lane high-speed serial interface on the P16 XMC port for customer-installed soft cores. P16 also supports 34 SelectIO channels. The P4 port adds another 60 SelectIO and global clock lines. Select I/O signals are Kintex-7 FPGA I/O pins that support single-ended I/O (LVCMOS, HSTL, SSTL) and differential I/O standards (LVDS, HT, LVPECL, BLVDS, HSTL, SSTL)
Two versions of the Kintex-7 are available, offering a choice of an FPGA device with 325k or 410k logic cells.
With Acromag’s Kintex-7 FPGA modules, you can greatly increase DSP algorithm performance for faster throughput using multiple channels and parallel hardware architectures. Free up CPU cycles by offloading algorithmic-intensive tasks to the FPGA co-processor.
These modules are ideal for high-performance customized embedded systems. Optimize your system performance by integrating high-speed programmable logic with the flexibility of software running on MicroBlazeImage may be NSFW.
Clik here to view.
soft processors.
Acromag’s Engineering Design Kit provides software utilities and example VHDL code to simplify your program development and get you running quickly. A JTAG interface enables on-board debugging. Additional Xilinx tools help finish your system faster. Maximize FPGA performance with Vivado® or ISE® Design Suite. And with ChipScopeImage may be NSFW.
Clik here to view. Pro tools, you can rapidly debug logic and serial interfaces
Performance Specifications
FPGA
FPGA device: Xilinx Kintex-7 FPGA. Model XC7K325T FPGA with 326,080 logic cells and 840 DSP48E1 slices or Model XC7K410T with 406,720 logic cells and 1540 DSP48E1 slices.
FPGA configuration: Download via JTAG or flash memory.
Example FPGA program: IP integrator block diagram provided for bus interface, front & rear I/O control, and SDRAM memory interface controller. See EDK kit.
I/O Processing
Rear high-speed I/O: 16 high-speed serial lanes. x8 lanes via P15 and x8 lanes via P16.
Rear user I/O: P16: 17 LVDS pairs (34 LVCMOS), 2 global clock pairs. P4: 30 LVDS pairs (60 LVCMOS), 2 global clock pairs.
Engineering Design Kit
Provides user with basic information required to develop a custom FPGA program. Kit must be ordered with the first purchase of a XMC-7K module (see www.acromag.com for more information).
XMC Compliance
Complies with ANSI/VITA 42.0 specification for XMC module mechanicals and connectors.
Complies with ANSI/VITA 42.3 specification for XMC modules with PCI Express interface.
Electrical/Mechanical Interface: Single-Width Module.
Electrical
XMC PCIe bus interface (P15 and P16): One 114-pin male connector (Samtec ASP-103614-05 or equivalent).
P15 primary XMC connector: 8 differential pairs (PCIe standard, Serial RapidIO, 10-Gigabit Ethernet, or Xilinx Aurora). JTAG.
System Management (XMC provides hardware definition information read by an external controller using IPMI commands and I2C serial bus transactions.):
3.3V power: 4 pins at 1A/pin. 3.3V auxiliary power: 1 pin, powers volatile memory to store the bitstream encryption key. Variable power (5V or 12V): 8 pins at 1A per pin.
P16 XMC connector: 4 differential pairs (PCIe, Serial RapidIO, or Xilinx Aurora). 17 LVDS pairs or 34 SelectI/O signals (differential pairs grouped per VITA 46.0 X38s). 2 global clock pairs. Vcco pins are powered by 2.5V and support the 2.5V I/O standards.
P4 PMC rear I/O connector: 64-pin female receptacle header. (AMP 120527-1 or equivalent). 64 I/O connections (30 LVDS pairs plus two global clocks). Vcco pins powered by 2.5V and support the 2.5V I/O standards.
Environmental
Operating temperature: XMC-7K325AX-LF: Conduction-cooled, -40 to 70°C. XMC-7K410AX-LF: Conduction-cooled, -40 to 70°C
Storage temperature: -55 to 125°C.
Relative humidity: 5 to 95% non-condensing.
Power: 3.3V (±5%): 7.8W typical. 12V (±5%): 2.7W typical. 3.3V AUX (±5%): 57µW
MTBF: Contact the factory.
The post XMC-7K CC: User-Configurable Conduction-Cooled Kintex-7 FPGA Modules appeared first on Acromag.